Cool-Lux A100 - Manual (Page 155)

8-7
Multiple Digital Media Card Slot (Supported with some models)
O
PT
IO
NAL
D
EVICES
1. Memory Stick Duo/Memory Stick Pro Duo/Mini SD card
is not supported.
2. Two kinds of cards will not work at the same time. Please
insert only one card when using Multiple Digital Media
Card Slot.
Note: If Windows fail to read the SD/MS/MS Pro/MMC/xD card,
remove it then reinsert it.
Removing a SD/MS/MS Pro/MMC/xD card
To remove the memory card, follow the steps below.
1. In Windows
®
XP, open the Safely Remove Hardware icon on the sys-
tem tray and disable the inserted memory card.
2. Grasp the card and remove it.
Figure 8-6 Removing the inserted memory card
CAUTIONS: 1. Make sure the Multiple Digital Media Card Slot indicator
is out before you remove the card or turn off the com-
puter’s power. If you remove the card or turn off the
power while the computer is accessing the card you may
lose data or damage the card.
2. Please do not remove the inserted memory card from the
Multiple Digital Media Card Slot while in Standby or in
Hibernation state. If you do, PC may become unstable or
the data in the memory card may be lost.
3. Do not turn off or make computer in Standby or Hiberna-
tion mode during data is being transferred. The computer
could become unstable or data would be lost.
SD/MS/MS P RO /
MMC/ X D CARD