Cool-Lux A100 - Manual (Page 89)

4-7
Using optical media drives
O
PER
ATING
B
ASICS
2. Do not keep foreign matter from entering the drive. Check
the back edge of the tray to make sure it carries no debris
before closing the drive.
4. Press gently at the center of the CD/DVD until you feel it click into place.
The CD/DVD should lie below the top of the spindle, flush with the spindle
base.
5. Push the center of the drawer to close it. Press gently until it locks into
place.
CAUTION: If the CD/DVD is not seated properly when the drawer
is closed, the CD/DVD might be damaged. Also, the drawer might
not open fully when you press the eject button.
Figure 4-8 Closing the DVD-ROM drawer
Removing discs
To remove the CD/DVD, follow the steps below and refer to figure 4-9.
CAUTION: Do not press the eject button while the computer is
accessing the DVD-ROM drive. Wait for the optical media drive
indicator to go out before you open the drawer. Also, if the CD/DVD
is spinning when you open the drawer, wait for it to stop before you
remove it.
1. To pop the drawer partially open, press the eject button. Gently pull the
drawer out until it is fully opened.