Cool-Lux A100 - Manual (Page 212)

User’s Manual
D-4
A
PPEND
IX
D
S7Connection completion time-out
This register sets the time, in seconds, that the modem must wait before
hanging up because carrier is not detected. The timer is started when the
modem finishes dialing (originate), or goes off-hook (answer). In origi-
nate mode, the timer is reset upon detection of an answer tone if allowed
by county restriction. The timer also specifies the wait for silence time
for the @ dial modifier in seconds. S7 is not associated with the W dial
modifier.
Range: 1-255
Default: 50
Units:
seconds
S8Comma pause time
This register sets the time, in seconds, that the modem must pause when
it encounters a comma (,) in the dial command string. In some coun-
tries/regions, S8 will set both wait before dialing and comma pause
time.
Range: 0-255
Default: 2
Units:
seconds
S11DTMF dialing speed
This register determines the dialing speed which is prefixed for each
country/region.
Range: 50-255
Default: 95
Units:
.001 seconds
S12Escape guard time
This register sets the value (in 20 millisecond increments) for the
required pause after the escape sequence.
Range: 0-255
Default: 50
Units:
.02 seconds