Cool-Lux A100 - Manual (Page 73)

3-5
Connecting the AC adaptor
G
ETTI
N
G
S
TART
ED
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want to oper-
ate from AC power. It is also the fastest way to get started, because the battery
pack will need to be charged before you can operate from battery power.
The AC adaptor can be connected to any power source supplying from 100 to
240 volts and 50 or 60 hertz. For details on using the AC adaptor to charge the
battery pack, refer to Chapter 6, Power and Power-Up Modes.
CAUTION: Use of the wrong adaptor could damage your computer.
TOSHIBA assumes no liability for any damage in such case. The
output rating for the computer is 19 volts DC.
1. Connect the power cord to the AC adaptor.
Figure 3-2 Connecting the power cord to the AC adaptor
2. Connect the AC adaptor’s DC output plug to the DC IN port on the back
side of the computer.
Figure 3-3 Connecting the adaptor to the computer
DC-IN