Cool-Lux A100 - Manual (Page 160)

User’s Manual
8-12
O
PT
IO
N
A
L
D
EVIC
E
S
You can use the HW Setup to select between
Auto-Selected
and
Simultaneous
displays. Refer to Chapter 7, HW Setup and Passwords .
If you have selected
Simultaneous
under the
Display
options of the HW Setup,
both the external monitor and the internal LCD will be active when you turn on
the computer. If
Auto-Selected
is selected, only the external monitor will be
active.
To change the display settings, press Fn + F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn + F5 to switch to the inter-
nal display. Refer to Chapter 5,
The Keyboard , for details on using hot keys to
change the display setting.
Note: If you set Simultaneous for the computer’s display, you
must set the computer’s display resolution to the same as that of the
external monitor or other device, such as a projector.