Casablanca Fan Company PN - Manual

® 3
1
CIRCUIT BREAKER
(TRIp BREAKER foR ThE
CIRCUIT yoU wIll BE
woRKIng on)
fUSE BoX
(REmovE fUSE foR ThE
CIRCUIT yoU wIll BE
woRKIng on)
18″
84″
70″
• The blades in each pack are matched for equal weight
to assure smooth fan operation. If more than one fan
is being installed, be careful not to mix blades from
different cartons.
• Inspect the contents of your carton for possible ship-
ping or handling damage and report any such damage
directly to your authorized Casablanca dealer.
• It is always a good idea to have an assistant to help
with the installation.
• When cleaning, painting, or working near your fan,
be very careful of the fan and blades. Always turn the
power OFF to the ceiling fan before servicing it, work-
ing on it, or replacing light bulbs.
• Never insert anything into the path of the fan blades
while the fan is in operation.
• Never install a fan over a pool or spa.
• Never operate a fan that has been damaged in any
way. Contact Casablanca Fan Company by calling toll
free 1-888-227-2178, or contact your local authorized
Casablanca dealer for assistance in obtaining service.
CONTENTS
READ AND SAVE THESE INSTRUCTIONS
• CAUTION: RISK OF ELECTRICAL SHOCK! All wiring must be performed in accordance with national and local electrical codes. If you
are unfamiliar with the wiring codes, you should use a qualified electrician. To avoid overheating and possible damage to other equipment,
do not install control to a receptacle, fluorescent light fixture, motor operated appliance, or transformer-supplied appliance.
• This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan installations, if it is
not, a new box must be installed. Casablanca extension poles are available for sloped or high ceiling installations.
• This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The maximum current requirement
for the fan with light fixture is 3.8 amps. The fan uses about 1 amp or 100 watts. Maximum light current is 2.8 amps or 340 watts of lighting.
• Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy hatch, make sure all wires
are within the canopy and that no wires are being pinched.
For best performance and for your warranty to be valid,
use only genuine Casablanca blades, light fixtures, and accessories.
SAfE USE
Safety and the proper operation of your Casablanca fan both require a thorough knowledge of the product
and proper installation; therefore, before attempting to install and operate your Casablanca fan, read this
owner’s manual completely and carefully. Retain this manual for future reference.
SAFETY FIRST
InTRoDUCTIon
PN 9543Z HN0210
CAUTION: To avoid possible electrical shock, make certain that electricity is turned off at the circuit breaker or fuse
box before attempting any installation procedure.
InTRoDUCTIon 1
moUnTIng RECommEnDATIonS 2
pREpARATIon InSTRUCTIonS 3
fAn InSTAllATIon 4
ConTRol fEATURES:
INTELI•TOUCH OPERATION 10
3-SpEED opERATIon 16
TRoUBlEShooTIng TIpS 18
BEfoRE yoU START