Rescia, Lag screw installation canopy installation, Canopy hardware – Casablanca Fan Company PN User Manual
Page 5
5
B
rescia
®
lAg SCREw InSTAllATIon
CAnopy InSTAllATIon
Step 4.
Attach the canopy to the crossbar mounting bracket with three of
the 8-32 x 2
1
/
2
” long canopy screws and lock washers provided with your
Casablanca fan. Hand tighten until snug against the ceiling.
CAnopy
SCREw
CAnopy
loCK
wAShER
fEED oUTlET BoX
wIRES ThRoUgh
CAnopy opEnIng
Note: On sloped ceilings, align the
canopy opening toward the top or
peak of the room.
CAnopy hARDwARE
CAnopy loCK wAShER (4)
CAnopy SCREw (4)
Step 3.
With the large washer attached, pass the lag screw
through the center hole of the crosbar mounting bracket and
screw into guide hole. Tighten until outlet box is firmly mounted
to beam. This box must be firmly secured to the ceiling. We
recommend that the ceiling fixture outlet box be of sufficient
capacity enabling it to support the weight of fan and light
fixture under any conditions.
lAg
SCREw
lARgE
wAShER
CAnopy
hATCh
CAnopy