Speed, Speed optional light fixture installation, Speed optional fan only wall controls – Casablanca Fan Company PN User Manual
Page 19: Speed optional fan and light wall controls, Speed optional remote control
19
COLLAR
SWITCH
HOUSING
3-SpEED opTIonAl lIghT fIXTURE InSTAllATIon
OPTIONAL LIGHT
PULL CHAIN
SWITCH
REVERSE
SWITCH
Pull-chain switches on the fan control the fan and lights. Using
the fan control pull-chain switch: Fan off at start.
First pull: fan ON, low speed
Second pull: medium speed
Third pull: high speed
Fourth pull: fan OFF
Using the optional light pull-chain switch: Light off at start.
First pull: light ON
Second pull: light OFF
Direction of blade rotation is controlled by the reverse slide switch
on the side of the switch housing.
No changes in household wiring are required.
1. Refer to light kit instructions to assemble and attach your light kit correctly.
2. Remove the two 8-32 screws from the switch housing cap.
3. Remove the plug from switch housing.
4. Install pull-chain switch and finger tighten collar on switch.
5. Connect one wire from pull-chain switch to the BLUE D1-Option wire. Secure
splice with a wire nut.
6. Connect other wire from pull-chain switch to BLACK wire from light kit. Secure
splice with a wire nut.
7. Connect WHITE wire from switch housing to WHITE wire from light kit.
Secure splice with a wire nut.
8. At the canopy, connect the BLACK and BLUE wires.
3-SpEED opTIonAl fAn only wAll ConTRolS
The W-41 and W-24 wall controls provide four-speed control of fan from a convenient wall location.
The W-41 and W-24 are designed to replace a standard wall switch and will fit wall boxes with a
depth of 2” or greater. Not for use with single pull-chain fan/light option wiring.
3-SpEED opTIonAl fAn AnD lIghT wAll ConTRolS
The W-81 and W-28 wall controls provide separate control of fan and light with two separate
controls. The W-81 and W-28 are designed to replace a standard wall switch and wall boxes with
a depth of 2” or greater. Requires two hot leads from wall box to ceiling wiring box.
FAN & SPEED
CONTROL
PULL CHAIN
SWITCH
NOTE: If a separate circuit is used to control the lights from a wall
control, the BLUE D1-Option wire in the canopy should be connected
to that switch leg.
OFF
LO
MED
MED
HI
HI
OFF
MAX
3-SpEED opTIonAl REmoTE ConTRol
3-Speed
Add remote control convenience to Casablanca 3-Speed fans. Adapt•Touch (W-52) easily con-
verts new or existing Casablanca 3-speed Pull Chain fans equipped with a Hang-Tru canopy.
Features include three fan speeds, instant off, and ful-range light dimming (on models equipped
with a light fixture). The hand-held remote includes a switch plate bracket for wall mounting, and
the receiver is quickly installed in the Hang-Tru canopy. Use one Adapt•Touch to control several
fans, or purchase extra controls to operate a fan from different locacations.