Apricorn Aegis Bio - USB 2.0 - Manual (Page 32)

Value You Can Depend On 32
4. After you click the “Reset Logon Data” button you will receive a
the following verification window.
You will be prompted to enter your user name and password in the
user credentials window during your next biometric logon.
How do I get the password bank to work with Firefox?
(Firefox must be set as the default browser.)
Click the Protector Suite Token tray icon in the system tray (usually 1.
in the lower right corner of your desktop).
Select Settings from the menu. 2.
Swipe your finger over the sensor to verify yourself. 3.
Select Password Bank tab. 4.
Click on Install extension... 5.
Choose the version of Firefox you are using. 6.
Click on Install now. 7.
Click on Restart Firefox. 8.
I plug in my Aegis Bio but the LED doesn’t light up.
The Aegis Bio will need to be initialized with the PSToken software.
Run the PSToken software, and enroll your fingerprint and use the
Aegis Formatter to prepare the drive.
If the Aegis Bio is lost, can someone remove the hard drive
and access the data?
No, due to Apricorn’s unique method of encrypting the drive on a
hardware level, the data will be stored in an encrypted state on the
drive.
How do I change my secret password?
The only way to change your secret password requires resetting the
drive which deletes all the information off the drive. If your device
had the password installed by the administrator you must have the
administrator reset the device to clear the password. If you set the
password, you can clear it by removing all of the fingerprints.