B&G Network GPSplus - Manual (Page 37)

38
CHANGING THE CURRENT LEG OF A ROUTE
The GPSPlus allows any leg of the selected route to be
missed or skipped over so that the route can be changed
without inserting or deleting any waypoints. Once a route
has been selected proceed as follows:
1. Press the NAV key. The
display will show the last
NAV page displayed. 2. Press the SETUP key
three times. The display
will show the current leg
number of the selected
route, e.g. CURNT LEG 0. 3. Press the ENTER key,
the leg number will flash.
Use the ▼ STEP ▲ knob
to select a different leg
number. 4. Press the ENTER key to
memorise the selection.
The NAV key will now
display information about
the new leg