Cooper Instruments & Systems M5-1000 High Capacity Digital Force Gage - Manual (Page 14)

CF 183 11 32-1113 REV 2 1010
13
Click “Install”.
3. The next screen appears as follows:
Click “Continue Anyway”.
4. After installation completes the following screen may appear in non-Windows 7 operating systems.
Restart the computer before connecting a USB device.
5. After Windows as restarted, plug in the device. The following will occur:
Windows 7 Operating Systems – When the USB device has been plugged into a USB port, the driver
will automatically be found. When the driver installation is complete, a message will appear as follows:
“The Mark-10 USB device driver is now installed and ready to use”.
Non-Windows 7 Operating Systems – When the USB device has been plugged into a USB port, the
following screen appears: