CTEK Z4200U SkyRouter - Manual (Page 42)

26 October 2012
38
4.4.4.2 UDP PAD Services
Figure 27 - UDP Pad Configuration
PAD Operational Mode
Outbound IP Parameters.
Inbound IP Parameters
This setting is used to select whether the UDP PAD will operate in client or server mode. In client mode the PAD will
transmit to a server defined by the Outbound IP Parameters. In Server mode the PAD will listen for UDP traffic on the
Port defined in Inbound IP Parameters. The IP address table found in Inbound IP Parameters allows the user to specify
certain IP addresses that will be listened for. Traffic from all other IP addresses is ignored.