CTEK Automation Control Application APN007 - Manual (Page 11)

Application Note – Automation Control Application
APN007 25 July, 2014
6
SMS Remote Control:
Enable or disable SMS read/write control/monitoring of automation control I/O pins. (Introduced in
release 4.2 – see TechNote TN009 for details)
Authorized Phone Numbers:
A list of between 0 and 5, 10-digit, space separated phone numbers that are permitted to use the
SMS Remote Control feature. A blank field blocks all phone numbers. The * (star) character
allows any number. Although its use is not recommended the * character will also permit SMS
control via the carrier’s email to SMS gateway.
Logging On/Off:
Enable or disable logging. Log files are formatted in the comma separated value (CSV) format
and can be read and manipulated with a spread sheet program such as Excel. Inputs are logged
at a rate defined on each input pin. Output logging is set to either on or off on each individual
output pin. See Logging rules section.
Alarms On/Off:
Enable or disable alarms for the entire controller. Alarms can also be enabled or disabled for
each individual input.
Alarm Delivery Method:
Select whether alarms will be delivered by SMS (text messaging), email, or both.
Send Lat/Lon:
Send the current position (latitude and longitude) of the unit with all alarm entries, both SMS and
email.
Destination Phone Number for Alarms:
The phone number of the handset or device that will receive SMS alarms.
Destination email address for Alarms:
The email address that will receive alarms
Log Delivery Parameters:
Logs are files containing comma separated values that can be directly read into a spread sheet or
database application. Logging options are available for each input and output. Logs can be
delivered by email on a schedule established in this panel.
Email address for this device:
If the controller is going to send email alarms and logs it will require an email address to use as
the sender. This is typically an email address from the customers email domain. All boxes in a
network can use the same email address.
Email User Name and Password
Login information for the SkyRouter email client to use when connecting to the customer's email
server to send alarms and reports.
SMTP Server Address and Port:
Information required about the customer's email server so the SkyRouter can connect to it to
send reports and alarms.