CTEK Automation Control Application APN007 User Manual
Page 38
Application Note – Automation Control Application
APN007 25 July, 2014
33
Programs
Programs are named groups of functions that can be applied to a specific input or output as the
result of a threshold event or level occurring on an input or virtual output. For instance, a program
called
Power Indicator OFF (9) could be used to turn on an indicator whenever charging power
is removed from a battery powered system. The same program could also set the application
status to yellow or 1 for display on VDDNS. Programs are assigned names that are made
available in the program pull-down field of the input and virtual output edit screens. To create,
modify, or delete a program select the Program option on the main menu screen. The following
selection screen will be shown.
Figure 32 – Program Select
To view, modify, or delete an existing program select a program number from the display menu.
To create new programs enter a program number that does not currently exist into the selection
field. When a program is displayed, it will appear as in Figure 32 below.