CTEK Automation Control Application APN007 - Manual (Page 41)

Application Note – Automation Control Application
APN007 25 July, 2014
36
The Control Panel
The Control Panel for the Automation Control provides a consolidated view of selected inputs and
outputs that have been selected for display in their specific configuration. The control panel also
provides On/Off buttons for digital outputs and a data entry field for numeric outputs. Inputs are
always displayed as read only..
The Control Panel is accessible from the SkyRouter's top level menu at the same level as the
general administration menu. It can also be accessed from applications category under the
general administration menu.
Figure 34 - Control Panel Selection at Login
Provisioning the Control Panel
After the input and output configurations have been the new settings are deployed by returning to
the top level configuration menu (Figure 3) and pressing the Execute New Configuration button.
There will be a brief delay will all of the input and output settings are deployed and all of the
inputs read. This activity will also create a new Control Panel display. An example of a Control
Panel is shown below.