CTEK Automation Control Application APN007 - Manual (Page 35)

Application Note – Automation Control Application
APN007 25 July, 2014
30
Figure 30 - Edit Input Formula
Operands
Current Input Pin:
Selects the input value provided by the pin to which the formula is attached as an operand
Other Input Pin:
Selects the value on the input pin referenced in the right hand column
Output Pin =
Selects the value on the output pin referenced in the right hand column
Constant Value =
Use the constant entered in the center column as the next operand
Correction:
The correction value associated with this input becomes the next operand
Min Range:
The minimum range value associated with this input becomes the next operand
Max Range:
The maximum range value associated with this input becomes the next operand
Max – Min Range
The value (Maximum Range - Minimum Range) becomes the next operand
Min Units:
The minimum units value associated with this input becomes the next operand
Max Units:
The maximum units value associated with this input becomes the next operand