Yealink SIP-T46G - Manual (Page 117)

Basic Call Features
107
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call when there is an active call on the phone. Otherwise, another
incoming call is automatically rejected by the phone with a busy message when there is
an active call on the phone. You can also enable or disable the phone to play a warning
tone when receiving another call.
To configure call waiting via phone user interface:
1. Press Menu->Call Features->Call Waiting.
2. Press or , or the Switch soft key to select Enabled from the Call Waiting
field.
3. Press or , or the Switch soft key to select Enabled from the Play Tone field.
4. (Optional.) Enter the call waiting on code or off code respectively in the On Code
or Off Code field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Call waiting is configurable via web user interface at the path Features->General
Information.
You can create a conference with two parties using the phone’s local conference. You
can create a conference between an active call and a call on hold by pressing the
Conference soft key. The SIP-T46G also supports network conference.
Note
The SIP-T46G IP phone supports up to 3 parties (including yourself) in a conference call.
Network conference is not available on all servers. For more information, contact your
system administrator.