Yealink SIP-T46G - Manual (Page 27)

Getting Started
17
3. Enter the user name and password in the corresponding fields.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
Generally, your phone will be deployed with multiple other phones. In this case, your
system administrator will configure the phone parameters beforehand, so that after you
start up your phone, the phone will be registered and ready for use. If your phone is not
registered, you may have to register it. For more information on how to register your
phone, refer to
Account Management on page 71 .
If the phone has successfully started up, the idle LCD screen will be shown as below.
Wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters,
contact your system administrator.