Yealink SIP-T46G - Manual (Page 64)

User Guide for the SIP-T46G IP Phone
54
call using the headset automatically. For more information on using the headset to
place a call, refer to
Placing Calls on page 83 .
To deactivate the headset mode:
1. Press again on the phone.
The HEADSET key LED goes out when the headset mode is deactivated.
You can use headset in priority when enabling headset prior. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
To use headset prior, you should activate the headset mode in advance:
1. Physically connect the headset.
2. Press to activate the headset mode.
Note If headset prior is enabled, the headset mode will not be deactivated until you press the
HEADSET key again.
Headset prior is configurable via web user interface only.