Yealink SIP-T46G - Manual (Page 148)

User Guide for the SIP-T46G IP Phone
138
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
To listen to voice mails:
1. When the phone user interface prompts receiving new voice mails and the power
indicator LED slow flashes red, press or the Connect soft key to dial out the
voice mail access code.
2. Follow the voice prompt to listen to voice mails.
Note
To view the voice mail via phone user interface:
1. Press Menu->Messages->Voice Mail->View Voice Mail.
The LCD screen displays the amount of new and old voice mails
2. Select an account and then press the Connect soft key to listen to voice mails.
The SIP-T46G IP phone supports MWI when receiving a new voice message. If someone
leaves you a voice mail, you will receive a message waiting indicator. MWI will be
indicated in three ways: a warning tone, an indicator message (including a voice mail
icon) on the LCD screen, and the power indicator LED slow flashes red. This will be
cleared when you retrieve all voice mails or delete them.
Voice mail access code must be predefined on the system server. Contact your system
administrator for the more information.
Before listening to voice mails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the power indicator LED will go out.