Yealink SIP-T46G - Manual (Page 147)

Advanced Phone Features
137
You can leave voice mails for someone else on the SIP-T46G IP phone. You can also listen
to the voice mails stored in a centralized location. When receiving a new voice mail, the
phone will play a warning tone, and the power indicator LED will slow flash red. The
LCD screen will prompt receiving a new voice mail with the number of waiting voice
mails (e.g., New Voice Mail(1)) and an icon.
Note
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave a voice mail,
and then hang up.
To configure voice mail access codes via phone user interface:
1. Press Menu->Messages->Voice Mail->Set Voice Mail.
2. Press the navigation keys to highlight the account which you want to set.
3. Press the 123 soft key to select the proper input mode and then enter the voice mail
access code (e.g., *97).
Voice Mail is not available on all servers. Contact your system administrator for more
information.