Yealink SIP-T48G - Manual (Page 100)

User Guide for the SIP-T48G IP Phone
90
- With the optional headset connected, press to activate the headset mode.
Enter the desired number using the keypad or the on-screen keypad.
Press , , or tap the Send soft key.
Note
To place multiple calls:
You can have more than one call on your SIP-T48G IP phone. To place a new call during
an active call, do one of the following:
- Tap the line key. The active call is placed on hold.
Enter the desired number using the keypad or the on-screen keypad.
Press , , or tap the Send soft key.
- Press or tap the Hold soft key to place the original call on hold.
Tap the New Call soft key.
Enter the desired number using the keypad or the on-screen keypad.
Press , , or tap the Send soft key.
You can tap the desired call, and then tap the Resume soft key to retrieve it.
When you are not in another call, you can answer a call in three ways:

Using the handset

Using the speakerphone

Using the headset
Note
Answering When Not in Another Call
Call duration and destination will always appear on the touch screen for the active call.
To answer a call using the handset:
1. Pick up the handset.
You can ignore incoming calls by pressing the X key or tapping the Reject soft key or the
Silence soft key. You can also activate Do Not Disturb mode to ignore the incoming calls
without ring on your phone. For more information, refer to
Do Not Disturb (DND) on page
99 .
You can forward incoming calls to someone else by tapping the Forward soft key. For
more information, refer to Call Forward on page 104 .
To permanently use the headset mode, refer to Headset Prior on page 60 .