Yealink SIP-T48G - Manual (Page 90)

User Guide for the SIP-T48G IP Phone
80
3. Click Del to delete the replace rule(s).
Note
You can configure one or more dial-now rules (up to 100) on your phone. When the
dialed number matches the dial-now string, the number will be dialed out automatically.
For example, a dial-now rule is configured as "2xx", then any entered three-digit string
beginning with 2 will be dialed out automatically on the phone.
To add a dial-now rule via web user interface:
1. Click on Settings->Dial Plan->Dial-now.
2. Enter the desired value (e.g., 1234) in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
For more information on the valid value of the Account field, refer to Replace Rule
on page 78 .
4. Click Add to add the dial-now rule.
When you enter the number “1234” using the keypad, the phone will dial out “1234”
automatically without pressing any key.
Note
Delay Time for Dial-Now Rule
You can configure the delay time for dial-now rules. That is, you can configure your
Replace rule is configurable via web user interface only.
You can also edit or delete the dial-now rule, refer to Replace Rule on page 78 for more
information.
Dial-now rule is configurable via web user interface only.