Yealink SIP-T48G - Manual (Page 99)

Basic Call Features
89
You can enter the number using the keypad displayed on the touch screen. You can
also tap the History soft key or the Directory soft key to search for an entry, and then
place a call.
3. Press , , or tap the Send soft key.
The # key is configured as a send key by default. You can also set the * key as the send
key, or set neither. For more information, refer to the
Key as Send on page 31 .
Note
To place a call using the hands-free speakerphone mode:
Do one of the following:
- With the handset on-hook, press or tap the line key to obtain a dial tone.
Enter the desired number using the keypad or the on-screen keypad.
Press , or tap the Send soft key.
- With the handset on-hook, enter the desired number using the keypad or the
on-screen keypad.
Press , , or tap the Send soft key.
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press to activate the headset mode.
Tap the line key to obtain a dial tone.
Enter the desired number using the keypad or the on-screen keypad.
Press , , or tap the Send soft key.
You can also dial using the SIP URI or IP address. To obtain the IP address of a phone,
press the OK key. The maximum SIP URI or IP address length is 32 characters. For
example, SIP URI: [email protected], IP: 192.168.1.15.
Your phone may not support direct IP dialing. Contact your system administrator for more
information.