Concord Camera 5345z - Manual (Page 15)

14
3. Installing the Camera driver
Installing the software on a Windows PC
The following software will be installed in the installation sequence:
• Arcsoft PhotoImpression 3
1. Concord EyeQ Easy too setup is preparing the installshield
wizard which guide you though the rest of the setup
process, click "cancel" if you want to quit.
2. After the preparation completed, you can click " next" to
start the software installation. Otherwise, click " cancel" if
you want to quit.
Arcsoft PhotoImpression 3
1. Select the language of PhotoImpression installation and
then press "OK" to confirm. Also, this language will be
preset to the PhotoImpression 3 software.
2. PhotoImpression setup is preparing the installshield wizard
which guide you though the rest of the setup process, click
"cancel" if you want to quit.
3. Installshield wizard which install PhotoImpression to your
hard disk. To continue, click "next". Otherwise, click
"cancel" to quit.
4. Please read the license agreement carefully and then press
"yes" to accept the agreement and continue the installation
or press "No" to reject it and quit.
5. Select the folder which locate the PhotoImpression.
Installshield winzard will preset the default location
but you can select the other one. Press "next"
to continue, otherwise, press "cancel" to quit.
6. Select the component you want to install, clear the
component you do not want to install. Installshield
will show the available capacity of your hard disk and the
require capacity of the software.
Easy Too Inst.Manual(5S1048-00) 28/6/02 5:39 pm Page 14