Concord Camera 5345z - Manual (Page 9)

Selecting the power supply
To extend the battery life, remove the batteries from the camera
when it is not in use. Remember to transfer your pictures to your
computer first or you will lose them.
Note:
• Do not use different types of batteries together.
• Soiling, such as fingerprints on the battery terminals, can
significantly reduce the battery life.
• Do not use new and used batteries together. Different brands of
batteries will yield different results.
• The battery life of alkaline batteries may be shortened when
exposed to temperatures of 10°C or below.
• Always turn the camera off when replacing the batteries. If the
camera is left on, the camera’s settings may revert to the default
settings.
• After 30 seconds of inactivity the camera will switch to standby
mode automatically. The LCD will not be illuminated and all
images will be stored in the camera’s memory.
• You may lose images stored in the camera if the battery power is
insufficient.
• Do not use rechargeable batteries.
Inserting the batteries
1. Open the Battery Compartment and insert 2 x AAA batteries. When
inserting the batteries, make sure that you follow the polarity
direction (+) (-), which is indicated in the battery compartment.
2. Press down on the battery cover to lock the battery door.
3. Please make sure you have downloaded all pictures before
replacing your batteries.
8
Easy Too Inst.Manual(5S1048-00) 21/6/02 9:54 am Page 8