Concord Camera 5345z - Manual (Page 16)

7. Setup will add program icon to the program folder list. You
may type a new folder name, or select one from the
existing folder. Press "next" to continue to next process.
8. PhotoImpression setup is performing the
request operation. Finally, press "Finish" to
complete the installation.
Install the Camera driver – Concord EyeQ Easy Too
The Concord EyeQ Easy Too driver will install immediately after the Concord
EyeQ Easy Too software installation complete.
1. Press "next" to start the driver installation and then the
files will transfer to hard disk automatically.
2. Select the language of driver installation and then press
"OK" to confirm.
3. The installation will be completed after the
file transaction.
4. After the driver installation is completed, you must restart
your PC to activate the camera driver. Select yes and click
"OK" then your PC will restart immediately.
5. After the PC restart, plug in your camera with the USB cable. New hardware
will be detected and all drivers will be installed automatically.
Note: If you had installed the driver already, then you can choose modify the
driver, repair the driver or remove the driver when you start the driver
installation again.
15
Easy Too Inst.Manual(5S1048-00) 28/6/02 5:39 pm Page 15