Concord Camera 5345z - Manual (Page 20)

19
Uninstalling the driver on a Windows PC
User can automatically uninstall the driver using "Device Manager" in
the Control Panel.
Note: Use this procedure only when the digital camera is no longer
required or when the driver installation fails.
Procedure:
1. Connect the digital camera to your PC.
2. Switch on your PC and start up Windows.
3. Open the "My Computer" windows and double-click "System" in
the Control Panel.
4. Open the "Device Manager" page and then select "Imaging
device."
5. Select the "Dual mode DSC (2770) " under the "Imaging device
and then press "remove"
Important: If the camera is not connected properly, "Imaging Device"
will appear. Check the connection and make the necessary
adjustments if this message appears.
Easy Too Inst.Manual(5S1048-00) 19/6/02 9:49 am Page 19