Concord Camera 5345z User Manual
Page 8
7
Turning the camera on and off and learning the LCD display
Turn the camera on by pressing the Feature Button once. Two
beeping sounds will be heard. Press the Feature Button to cycle
through the Feature Modes. To exit the Feature Mode, continue to
press the Feature button until the LCD displays a number or wait 5
seconds without pressing any buttons.
oF
(Switch off the camera)
St
(Self-timer)
d8
(Continuous mode for taking video clips)
CA
(Clear all images)
CL
(Clear last image)
Lo/HI
(Change from High to Low resolution / from
Low to High resolution)
50/60
(Filter Light Frequency)
Ld/Hd
(Take photo in low density/high density mode)
Notes: After 30 seconds of inactivity, the camera will switch to
standby mode.The LCD will go blank. All images taken will be stored
in the camera’s memory and the camera’s settings will revert to the
default settings.
Easy Too Inst.Manual(5S1048-00) 19/6/02 9:49 am Page 7