Operations, Important, Cleaning with attachments – Bissell 1456E User Manual

Page 10

Advertising
background image

cleaning with attachments

Your deep cleaner comes equipped with

a hose and at least one attachment for

cleaning stairs, upholstery, and more.
Important! If using to clean upholstery,

check upholstery tags.
1.
Check manufacturer’s tag before cleaning.

“W” or “Ws” on tag means you can use your

deep cleaner. if the tag is coded with an “X” or

an “s” (with a diagonal stripe through it), or says

“Dry Clean Only”, do not proceed with any deep

cleaning machine. Do not use on velvet or silk.

if manufacturer’s tag is missing or not coded,

check with your furniture dealer.
2. To begin cleaning with attachments, follow

instructions on page 7 for filling 2-in-1 water tank.
3. The DeepClean Premier is designed with

an automatic diverter. simply place unit in the

upright position in order to clean with hose.
4. Attach cleaning tool of your choice to the

end of hose.
NotE: If your deep cleaner came with a

Deep Reach tool, do not follow the cleaning

tool instructions below. Instead, follow the

“cleaning with Deep Reach tool” instructions

in the next section.
5.
Hold tool approximately 2.5 cm above soiled

surface. Press spray trigger to apply cleaning

solution to soiled area. Using brush on tool,

gently scrub area to be cleaned. Release spray

trigger, apply downward pressure on tool and

pull it toward you to suction up dirt and

cleaning solution. Continue until no more dirt

can be removed.

Caution: Do not overwet.

6. When finished cleaning, remove and rinse

tool(s) in clean, running water.
7. it is recommended that you suction clean

water from the tap to rinse out the hose. be

careful not to over-fill your tank.
8. before wrapping hose onto rack, lift end

of hose and stretch out to ensure all water is

cleared from hose.
9. Wrap hose around rack.

cleaning with Deep Reach™ tool (select models only)

1. set tool on soiled surfaces and press spray

trigger to spray solution onto soiled area to

be cleaned.
2. slowly move tool back and forth over soiled

surface, keeping tool in contact with carpet.
3. Release spray trigger and move tool slowly

over soiled area to suction up water and dirt.
4. Continue to clean the area, working in small

sections, until no more dirt can be removed.

Operations

www.bissell.com

10

1.

3.

4.

ImpoRtANt

Check for colourfastness in an inconspicuous place. If

possible, check upholstery stuffing. Coloured stuffing may

bleed through fabric when it becomes wet.

Adsdfdd

ghg bvh

cvbbj jkn hnbj

jkvh

gcghhjj jhffhl k

llgh

Manufacturer’s tag

7.

8.

Advertising
This manual is related to the following products: