Bissell 1456E - Manual (Page 8)

Operations
carpet cleaning
1. Plug into a proper outlet and push power
button
located on front of handle.
2. Recline handle by pressing on recline pedal on
back of machine behind 2-in-1 water tank.
3. While pressing spray trigger, make one
slow forward wet pass and another one back.
Caution: Do not overwet.
NotE: your machine is equipped with a circuit
breaker that will automatically shut off the brush
if a large or loose object is caught in the brush
roll. If that happens, be sure to unplug your
machine, remove the foreign object, and then
plug machine back in to reset circuit breaker.
4. Release spray trigger and make one slow
forward and backward pass over same area.
5. Repeat cleaning passes until solution being
suctioned up appears clean. Continue passes
without pressing spray trigger until you can’t see
any more water being suctioned up. Repeated
passes will help aid in dry time.
NotE: you may notice hair and debris deposits
on the carpet or in the tank that were loosened
by the cleaning action. this debris should be
picked up and thrown away.
cleanShot™
Cleanshot is an optional feature that can be
used to fight tough stains. it can be used as
either a tough stain pretreat or during the
deep cleaning process itself. To use Cleanshot
either as a pretreat, or during deep cleaning,
follow instructions below.
1. Press Cleanshot button on front of machine’s
handle and aim focused stream onto stain for
up to 5 seconds.
2. Allow formula to soak in for 15 seconds.
3. Without pressing spray trigger, run machine
over stain to extract it until no formula or water
can be seen coming up from the carpet.
4. Repeat as needed until stain is gone.
AttENtIoN
Some Berber carpets have a tendency to fuzz with wear.
Repeated strokes in the same area with an ordinary vacuum
or deep cleaner may aggravate this condition.
1. 2.
Recline Pedal
www.bissell.com
8
1.
Cleanshot
button
Power button
cAUtIoN
Brushes may unexpectedly restart. To reduce the risk of
injury from moving parts, unplug before removing nozzle
for cleaning or servicing.