EcoPure MW_MW30_7301415A - Manual (Page 10)

10 Miracle Water Installation & Operation Manual
Other Requirements
• A 120V-60Hz, grounded electrical outlet (continuously ‘‘live’’) is needed within 10’ of the unit.
• A drain is needed for regeneration discharge water. A floor drain, close to the unit, is preferred.
A laundry tub, standpipe, etc., are other drain options.
Tools and Materials You May Need
• Common Screwdriver • Tape Measure
•Pliers • Pipe and fittings as required
Soldered Copper
• Tubing cutter
• LEAD-FREE solder and flux
• Propane torch •Emery cloth, sandpaper or steel wool
• Misc. fittings
Threaded
• Pipe cutter or hacksaw
• Pipe joint compound*
• Threading tool • Misc. fittings
CPVC Plastic
• Pipe cutter
• Solvent cement*
• Hacksaw • Primer
• Adjustable wrench • Misc. fittings
NOTE: The salt storage tank drain elbow accepts either 1/2” or 3/8” I. D. hose.