EcoPure MW_MW30_7301415A - Manual (Page 17)

17 Miracle Water Installation & Operation Manual
Programming the Faceplate Timer
Figure 12
If you have questions about installation, programming, operating and routine maintenance...
call 1-800-356-7851
When the transformer is plugged into the electrical outlet, a model code and a test number (exam-
ple:
s3.0), begins to flash in the faceplate display. Then, 12:00 AM and PRESENT TIME begins to flash.
NOTE: If SR --or ----shows in the display, press the UP L or DOWN M button until LE31
shows. Then, press the SELECT/MENU button to set, and change to the
flashing PRESENT TIME display.
Step 1. Set Time of Day
If the words PRESENT TIME do not show in the display, press the (Select/Menu) button
until they do.
1. Press the UP L or DOWN M buttons to set the present time. UP L moves the display ahead;
DOWN M moves the time backward.
Be sure AM or PM, is correct.
NOTE: Press buttons and quickly release to slowly advance the display. Hold for fast
advance. This procedure applies for all following settings.
SELECT
MENU
SELECT
MENU