EcoPure MW_MW30_7301415A - Manual (Page 28)

28 Miracle Water Installation & Operation Manual
3. Again, press the (Recharge) button to move the softener into backwash. Look for a
fast flow of water from the drain hose.
a. An obstructed flow indicates a plugged top distributor, backwash flow plug, or drain hose.
4. Press the (Recharge) button to move the softener into fast rinse. Again look for a fast
drain flow. Allow the softener to rinse for a few minutes to flush out any brine that may remain
in the resin tank from the brining cycle test.
5. To return the softener to service, press the (Recharge) button.
RECHARGE
RECHARGE
RECHARGE