FASS T D09 095G - Manual (Page 11)

A. Using thread tape, install the 10-300 into “E” and the 10-301 into the “T” port (on opposite end).
Torque to 40 lb./ft.²
Note: Do Not Put Thread Tape on Flare of Fitting. ***The use of
thread sealant is not recommended***
B. For fitting purposes. Secure PBR-2001 to pump assembly lightly with (3) 1/4”-20x1 3/4 bolts and (3)
WA-1001D. This will assembly will be used in future steps for correct fitting of brackets.