FASS T D09 095G - Manual (Page 16)

Note: The Red Plastic Plugs located in the “H” ports can stay in place fuel will not flow
through these ports. Coolant can be plumbed into these ports to heat the fuel in the Winter
months.
To assist with priming your FASS pump crack the FWS-3003. Put power to the FASS pump to
activate the pump. When the tone of the pump changes you can tighten up the fuel filter. If
you need a video of the priming process go to www.FASSride.com.
The factory suction line can be capped off or removed from the truck. Make sure to drain fac-
tory filter. The openings on the filter and tank will need to be capped off to keep debris from
getting into lines or canister.