Trip 1 & 2, 116 information displays – FORD 2013 Flex v.2 User Manual

Page 116

Advertising
background image

• Fuel gauge: Indicates approximately how much fuel is left in the fuel

tank. The fuel gauge may vary slightly when the vehicle is in motion
or on a grade. When the fuel level becomes low, the level indicator will
change to amber. When the fuel level becomes critically low, the level
indicator will change to red.
Note: When a MyKey

௡ is in use, low fuel warnings will display earlier.

The fuel icon and arrow indicates which side of the vehicle the fuel
filler door is located.

• Bar/Round tachometer: Indicates the engine speed in revolutions per

minute. Driving with your tachometer pointer continuously at the top
of the scale may damage the engine. During SelectShift Automatic™
transmission (SST) use, the currently selected gear will appear in the
display.

• Engine coolant temperature gauge: Indicates engine coolant

temperature. At normal operating temperature, the level indicator will
be in the normal range. If the engine coolant temperature exceeds the
normal range, stop the vehicle as soon as safely possible, switch off
the engine and let the engine cool.

• Intelligent AWD (if equipped): displays power distribution between the

front and rear wheels. More power to either front or rear wheels will
be displayed by more area filled in.

Trip 1 & 2

Choose between the standard or enhanced trip display.

Trip 1 & 2

Standard display

†Enhanced

display

Trip distance

X

X

Elapsed trip time

X

X

Average fuel economy

X

Estimated amount of fuel consumed

X

Total odometer (lower left corner)

Press OK to pause the Trip 1 or 2 screen. Press again to un-pause.

Press and hold OK to reset the currently displayed trip information.

†When the vehicle is in P (Park), the enhanced display is always
shown regardless of setting.

• Trip distance — shows the accumulated trip distance.

116

Information Displays

2013 Flex (471)
Owners Guide gf, 2nd Printing
USA
(fus)

Advertising