Navigation system (if equipped), Setting a destination, Navigation system – FORD 2013 Flex v.2 User Manual

Page 499: Myford touch ா 499

Advertising
background image

*

If you have said “Temperature”, you can say any of the commands in the

following “Temperature” chart.

“TEMPERATURE”

“High”

“Low”

“<15.5–29.5> degrees”

“<60–85> degrees”

“Help”

NAVIGATION SYSTEM (IF EQUIPPED)

Note: The navigation SD card must be in the SD card slot to operate the
navigation system. If you need a replacement SD card, see your
authorized dealer.

Note: The SD card slot is spring-loaded. To remove the SD card, just
push the card in and release it. Do not attempt to pull the card out to
remove it; this could cause damage.

Your navigation system is comprised of two main features, destination
mode and map mode.

To set a destination, press the green corner of your touchscreen, then
the Dest button when it appears. Refer to Setting a destination.

To view the navigation map and the vehicle’s current location, touch the
green bar in the upper right hand corner of the touchscreen, or, press
Dest > Map. Refer to Map mode.

Setting a Destination

Press the green corner of your touchscreen, then the Dest button when
it appears. Choose any of the following:

Destination selections

My Home

Street Address

Favorites

Intersection

Previous Destinations

City Center

Point of Interest

Map

Emergency

Edit Route Cancel Route

Previous Starting Point

Freeway Entrance/Exit

Latitude/Longitude

MyFord Touch

499

2013 Flex (471)
Owners Guide gf, 2nd Printing
USA
(fus)

Advertising