FORD 2013 Flex v.2 - Manual (Page 156)

To reinstall the non-adjustable head restraint, do the following:
• Remove: Pull up the head restraint until it reaches the highest
adjustment position and then press and hold the guide sleeve
unlock/remove buttons, then pull up on the head restraint.
• Reinstall: Align the steel stems into the guide sleeves and push the
head restraint down until it locks.
Third row head restraints (if
equipped)
The head restraints consist of:
A. Energy absorbing head restraint
B. Steel stems
C. Fold strap
• Fold: pull the fold strap (c). Pull it back up to reset.
Note: Pressing the stow or fold button on power folding seats will
automatically fold the head restraint.
Tilting Head Restraints
The front head restraints may have a tilting feature for extra comfort. To
tilt the head restraint, do the following:
1. Adjust the seatback to an upright driving/riding
position.
2. Pivot the head restraint forward toward your head
to the desired position.
After the head restraint reaches the forward-most tilt position, pivoting it
forward again will then release it to the rearward, un-tilted position.
156 Seats
2013 Flex (471)
Owners Guide gf, 2nd Printing
USA (fus)