122 information displays – FORD 2013 Flex v.2 User Manual

Page 122

Advertising
background image

Battery and

Charging System

Messages

Action / Description

Check Charging
System

Displayed when the charging system needs
servicing. If the warning stays on or continues
to come on, contact your authorized dealer as
soon as possible.

Turn Power Off to
Save Battery

Displayed when the battery management
system determines that:
• the battery is at a low state of charge or,

• the ignition has been in accessory position
or on position with the engine off for
approximately 45 minutes.
Turn the ignition off as soon as possible to
protect the battery. This message will clear
once the vehicle has been started and the
battery state of charge has recovered. Turning
off unnecessary electrical loads will allow
faster battery state-of-charge recovery.

Transport Mode
Contact Dealer

Contact your authorized dealer as soon as
possible.

Factory Mode Contact
Dealer

Contact your authorized dealer as soon as
possible.

BLIS

Messages

Action / Description

Blind Spot Not
Available Sensor
Blocked

Displayed when the blind spot information
system/cross traffic alert system sensors are
blocked. Driver can typically clean the sensor
to resolve.

Blind Spot System
Fault

Displayed when a fault with the blind spot
information system has occurred. Contact your
authorized dealer as soon as possible.

Cross Traffic Not
Available Sensor
Blocked

Displayed when the blind spot information
system/cross traffic alert system sensors are
blocked. Driver can typically clean the sensor
to resolve.

122

Information Displays

2013 Flex (471)
Owners Guide gf, 2nd Printing
USA
(fus)

Advertising