Visual park aid alert, Manual zoom, Parking aids 225 – FORD 2013 Flex v.2 User Manual

Page 225

Advertising
background image

Always use caution while reversing. Objects in the red zone are closest
to your vehicle and objects in the green zone are further away. Objects
are getting closer to your vehicle as they move from the green zone to
the yellow or red zones. Use the side view mirrors and rear view mirror
to get better coverage on both sides and rear of the vehicle.

Selectable settings for this feature are ACTIVE + FIXED, FIXED and
OFF.

Visual Park Aid Alert

Note: Visual park alert is only available when the transmission is in R
(Reverse).

Note: The reverse sensing system is not effective at speeds above 3 mph
(5 km/h) and may not detect certain angular or moving objects.

The visual park aid alert allows the driver to view the area that is being
detected by the reverse sensing system. The system uses red, yellow and
green highlights which appear on top of the video image when an object
is detected by the reverse sensing system. The alert highlights the
closest object detected. The reverse sensing alert can be disabled and if
visual park aid alert is enabled, highlighted areas are still displayed.

Refer to Adjusting the Rear View Camera Settings above on how to
enable or disable the visual park alert feature.

Manual Zoom

WARNING: When manual zoom is on, the full area behind the
vehicle is not shown. Be aware of your surroundings when using

the manual zoom feature.

Note: Manual zoom is only available when the transmission is in R
(Reverse).

Note: When manual zoom is enabled, only the centerline is shown.

Allows the driver to get a closer view of an object behind the vehicle.
The zoomed image keeps the bumper in the image to provide a
reference. The zoom is only active while the transmission is in R
(Reverse), When the transmission is shifted out of R (Reverse), the
feature automatically turns off and must be reset when it is used again.

Selectable settings for this feature are OFF, Level 1, Level 2 or Level 3.
Press the up and down arrows to change the view. The selection level
appears between the buttons (i.e. Level 1). The default setting for the
manual zoom is OFF.

Parking Aids

225

2013 Flex (471)
Owners Guide gf, 2nd Printing
USA
(fus)

Advertising