Climate controls – FORD 2010 Expedition v.3 User Manual

Page 109

Advertising
background image

1.

Defrost: Distributes outside air through the windshield defroster

vents and demister vents. Can be used to clear thin ice or fog from the
windshield.

2. Rear temperature control: Press to enable the auxiliary system and
set the desired rear cabin airflow temperature with the front control. The
rear cabin airflow temperature will match the driver airflow temperature
setting when only the center rear temperature bar is illuminated. The
rear cabin airflow temperature will be warmer or cooler than the driver
airflow temperature setting when more than one rear temperature bar is
illuminated. When the rear temperature button is pressed, the display
will show only the rear cabin settings. After the rear setting changes are
completed on the front control, the display will automatically show all
climate settings.

3. Passenger temperature control: Press to increase/decrease the
temperature for the passenger in the front of the vehicle.

4.

R

Rear defroster: Press to activate/deactivate the rear window

defroster. Refer to Rear window defroster later in this chapter for more
information.

5. R

Rear fan speed control: Press to enable the auxiliary system

or to adjust the rear fan speed from the front control. Press to manually
increase or decrease the fan speed. When the rear fan button is pressed,
the display will show only the rear cabin settings. After the rear setting
changes are completed on the front control, the display will
automatically show all climate settings.

6.

Passenger heated seat control (if equipped): Press to

activate/deactivate the passenger heated seat. See Climate controlled
seats
in the Seating and Safety Restraints chapter.

7.

Passenger cooled seat control (if equipped): Press to

activate/deactivate the passenger cooled seat. See Climate controlled
seats
in the Seating and Safety Restraints chapter.

8. REAR: Press to enable the control located in the rear floor console (if
equipped). Press again to turn the auxiliary system off. When the REAR
button is pressed, the display will show only the rear cabin settings.
After the rear setting changes are completed on the front control, the
display will automatically show all climate settings.

9.

Airflow direction control: Press to toggle through the air

distribution modes listed below. The selected mode will be shown in the
display.

Climate Controls

109

2010 Expedition (exd)
Owners Guide, 3rd Printing
USA
(fus)

Advertising
This manual is related to the following products: