Roadside emergencies – FORD 2010 Expedition v.3 User Manual
Page 347
Advertising
3. Connect the negative (-) cable to the negative (-) terminal of the
assisting battery.
4. Make the final connection of the negative (-) cable to the jump starting
stud located in the engine compartment, near the washer fluid bottle.
Note: Do not attach the negative (-) cable to fuel lines, engine rocker
covers, the intake manifold or electrical components as grounding points.
+
–
+
–
+
–
+
–
Roadside Emergencies
347
2010 Expedition (exd)
Owners Guide, 3rd Printing
USA (fus)
Advertising
This manual is related to the following products: