Roadside emergencies – FORD 2010 Expedition v.3 User Manual
Page 349
Advertising
Remove the jumper cables in the reverse order that they were
connected.
1. Remove the jumper cable from the jump starting stud.
Note: In the illustrations, lightning bolts are used to designate the
assisting (boosting) battery.
2. Remove the jumper cable on the negative (-) connection of the
booster vehicle’s battery.
3. Remove the jumper cable from the positive (+) terminal of the booster
vehicle’s battery.
+
–
+
–
+
–
+
–
Roadside Emergencies
349
2010 Expedition (exd)
Owners Guide, 3rd Printing
USA (fus)
Advertising
This manual is related to the following products: