Locks and security, Keys, Power door locks – FORD 2008 Explorer v.2 User Manual

Page 151: Smart unlocking feature, Autolock, Deactivating/activating autolock, Locks

Advertising
background image

KEYS

One key operates all the locks and starts the vehicle. Always carry a
spare key with you in case of an emergency.

Your keys are programmed to your vehicle; using a non-programmed key
will not permit your vehicle to start. If you lose your authorized dealer
supplied keys, replacement keys are available through your authorized
dealer. Refer to the SecuriLock™ passive anti-theft system section
later in this chapter for more information.

POWER DOOR LOCKS

Press control to unlock or lock all
doors.

Smart unlocking feature

The smart unlocking feature helps prevent you from locking yourself out
of the vehicle. With the key in any ignition position, the driver’s door will
automatically unlock if it is locked using the lock control on the driver’s
door panel while the driver’s door is open.

Autolock

The autolock feature will lock all the doors, liftgate and liftgate window
when:
• all doors are closed,
• the ignition is in the 3 (ON) position,
• you shift into any gear putting the vehicle in motion, and
• the vehicle attains a speed greater than 12 mph (20 km/h).
The autolock feature repeats when:
• any door is opened then closed while the ignition is in the 3 (ON)

position and the vehicle speed is 9 mph (15 km/h) or lower, and

• the vehicle attains a speed greater than 12 mph (20 km/h).
Deactivating/activating autolock

Your vehicle comes with the autolock feature enabled. There are four
methods to enable/disable this feature:

2008 Explorer (exp)
Owners Guide (post-2002-fmt)
USA
(fus)

Locks and Security

151

Advertising