FORD 2008 Explorer v.2 - Manual (Page 286)

Audible Warnings
Distance to Object Warning
Speed above 2.5 mph (4 km/h)
up to 1.6 feet (.5 meters) Solid
1.6 feet (.5 meters) to 3.1 feet
(1 meter) Fast beep
3.1 feet (1 meter) to 5.7 feet
(1.8 meters) Medium/fast beep
5.7 feet (1.8 meters) to 9 feet
(2.8 meters) Medium beep
9 feet (2.8 meters) to 13 feet
(4 meters) Medium/slow beep
13 feet (4 meters) to 19.6 feet
(6 meters) Slow beep
Speed below 2.5 mph (4 km/h)
up to 1.4 feet (.4 meters) Solid
1.4 feet (.4 meters) to 3 feet
(.9 meters) Fast beep
3 feet (.9 meters) to 4.5 feet
(1.4 meters) Medium beep
4.5 feet (1.4 meters) to 6.3
feet (1.9 meters) Medium/slow beep
6.3 feet (1.9 meters) to 8.7
feet (2.6 meters) Slow beep
8.7 feet (2.6 meters) to 16.4
feet (5 meters) No sound
The reverse sensing system is automatically enabled when the gear
selector is placed in R (Reverse) and the ignition is ON. A control in the
message center allows the driver to disable the system only when the
ignition is ON and the gear selector is in R (Reverse). Refer to Message
center in the Driver Controls chapter.
The message center will indicate the system is OFF and will not allow
the driver to switch the system ON to indicate a failure of the reverse
sensing system.
2008 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)
Driving
286