Daytime running lamps (drl) (if equipped), High beams, Flash to pass – FORD 2008 Explorer v.2 User Manual

Page 90: Lights

Advertising
background image

Push the headlamp control towards the instrument panel to deactivate
the fog lamps.

Daytime running lamps (DRL) (if equipped)

To activate DRL:
• the ignition must be in the ON position and
• the headlamp control is in the

or

position

• the transmission is not in park.

Always remember to turn on your headlamps at dusk or during
inclement weather. The Daytime Running Light (DRL) System

does not activate your tail lamps and generally may not provide
adequate lighting during these conditions. Failure to activate your
headlamps under these conditions may result in a collision.

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

Flash to pass

Pull the lever toward you to
activate. Release the lever to
deactivate.

2008 Explorer (exp)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

90

Advertising