FORD 2008 Explorer v.2 - Manual (Page 22)

Odometer: Registers the total miles (kilometers) of the vehicle.
• Standard instrument cluster
• Optional instrument cluster
Refer to Message center in the
Driver Controls chapter on how to
switch the display from English to
Metric.
Trip odometer: Registers the miles (kilometers) of individual journeys.
• Standard instrument cluster
Press the SELECT/RESET control
once to switch from the odometer to
the TRIP A feature. Press the
control again to select the TRIP B
feature. To reset the trip, press and
hold the control again until the trip reading is 0.0 miles.
• Optional instrument cluster
Press and release the message
center INFO button until TRIP A
mode appears in the display. Press
the control again to select the TRIP
B feature. Press the RESET button
to reset.
Note: Outside air temperature will
only be displayed in the instrument cluster message center on vehicles
with manual climate control.
2008 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)
Instrument Cluster
22