Cargo/reading lamps, Bulb replacement, Headlamp condensation – FORD 2008 Explorer v.2 User Manual

Page 94: Using the right bulbs, Lights

Advertising
background image

Cargo/reading lamps

The dome portion of the lamp or
the center light can be turned on
when the panel dimmer control is
rotated fully up or when a door is
opened.

The rear dome lamp can be turned
ON or OFF by sliding the control.

BULB REPLACEMENT

Headlamp Condensation

The headlamps are vented to equalize pressure. When moist air enters
the headlamp(s) through the vents, there is a possibility that
condensation can occur. This condensation is normal and will clear
within 45 minutes of headlamp operation.

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America and an
“E” for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. Using incorrect bulbs may damage the lamp assembly
or void the lamp assembly warranty or may not provide quality bulb burn
time.

Function

Number of bulbs

Trade number

Headlamp low & high beam

2

H13

Front park/turn lamp

2

3457 NAK (amber)

Side park/turn lamp

2

194

Upper rear tail lamp

2

194

Rear backup lamp

2

921

Lower rear stop/tail/turn lamp

2

4057K

High-mount stop lamps

5

W5WL

Rear license plate lamps

2

168

Front fog lamp

2

9145

2008 Explorer (exp)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

94

Advertising