FORD 2002 Focus v.2 - Manual (Page 129)

Seating and Safety Restraints
129
Returning the rear seatback to
an upright position
Fold back the seatback until it locks
with a distinct click". Do not place
any objects behind the seat which
could prevent the seat from locking.
Make sure the safety
restraints will function
properly and are positioned in
front of the seatback. Reinstall
the head restraints (if equipped).
Note that the center rear seat belt
cannot be pulled out until the
seatback has latched completely.
Folding the seat cushion and
seatback forwards
Pull the loop between the
respective seat cushion and
seatback, and fold the seat cushion
on that side forward.
Remove the head restraint(s) (if
equipped) of the rear seat, and fold
the seatback forward.
Stow the head restraint(s) in the
plastic retainers provided in the
now upright underside of the seat
cushion, as shown on the decal.
When returning the seats to their
original positions, make sure the
seat belts will function properly and
are positioned in front of the
seatback.